Fibre Channel 2/4/8G Load Modules Product MenuOverview The architectural breakthrough of Ixia’s family of high speed fibre channel test load modules delivers an industry-leading, high-density, affordable 2/4/8G fibre channel test solution. Based on the award-winning, field proven NGY family load module architecture, Ixia’s fibre channel load module is designed for high-density fibre channel testing, and converged data center infrastructure testing end-to-end simultaneously with fibre channel over Ethernet (FCoE). The fibre channel load module comes with four or eight ports and each port can be configured to run at 2, 4, or 8 G speeds. Ixia's fibre channel solution provides the highest port density in the industry, and offers a greener testing alternative when used with the Ixia XM12 high performance chassis – it requires one-quarter of the laboratory space, consumes one-half the power, and generates lower heat compared to other test solutions. The FCMGXM4S or FCMGXM8S are part of the NGY family of load modules, which leverage Ixia’s converged data center test applications to offer the highest port scalability, virtual scalability, protocol coverage, and the most affordable test solution available for data communications testing. No other vendor’s data communications test solution offers a wider range of price options, interfaces, and capabilities. The fibre channel load modules have a 4- or 8-port option, and deliver complete FC-2 and FCP data plane capabilities and performance. The series of modules provides the industry’s highest density fibre channel test solution. The NGY load module family supports a comprehensive portfolio of converged data center testing solutions including fibre channel over Ethernet, lossless Ethernet, and 2/4/8G fibre channel. Using the same NGY architecture for both FCoE and FC, consistency in protocol emulation, traffic generation, and statistics analysis is guaranteed across the two technologies. Features Industry's highest density 2/4/8G FC test solutionHighest density of ports per 3U chassis and 10U chassis Significantly reduced rack space Reduced power consumption, and cooling requirements Less power consumption than the nearest competitor - less lab cooling required Tracks and analyzes up to 1 million flows per port forReal-time latency Inter-arrival time Packet loss Sophisticated testing starting from FC-1Class 3 support Buffer-to-buffer credit Fibre channel link service (FC-LS) support Fibre channel generic services (FC-GS) support In-depth testing capabilities for R_RDY Control over SOF, EOF, CRC, Disparity error Complete control over all FC traffic packet content, including all frame_headers, extended_headers, and optional headers Killer packet payload such as CRPAT and CJPAT C-2 protocol emulation and statistics: FLOGI, NPIV, PLOGI, LOGO, Name Server, and more NPIV support Designed for converged data center testingUnified platform for end-to-end FCoE and FC testing Unified GUI for both FCoE and FC configuration Consistent protocol emulation, traffic generation, statistics analysis and workflow between FCoE and FC interfaces Specifications Feature Full Performance Load Modules FCMGXM8S/FCMGXM4S Number of ports per module 8/4 Number of chassis slotsper module 1 Maximum ports perchassis XM12 HighPerformance:88 / 48 XM2 Desktop: 16 / 8 Supported transceivers SFP+ Tri-rate 2/4/8G duplex LC connector 850nm multimode 1310 single mode Per-port CPU speedandmemory 800 MHz, 1 GB / 1 GHz, 1 GB Per-port capture buffer 512 MB Interface speeds 2/4/8G FC FC-1 Primitives Yes FC-2 Protocols Yes Number of transmitflowsper port(sequential values) Billions Number of transmitflowsper port(arbitrary values) 1 million Number of trackablereceiveflows per port 1 million Number of streamdefinitionsper port 256 Table UDF In packet stream (sequential) or advanced stream (interleaved) mode, eachstream definition can generate millions of unique traffic flows.1 million entriesComprehensive packet editing function for emulating large numbers ofsophisticated flows. Entries of up to 256 bytes, using lists of values can bespecified and placed at designated offsets within a stream. Each list consists ofan offset, a size and a list of values in a table format. Packet flow statistics Track 1 million flows Transmit engine Wire-speed packet generation with timestamps, sequence numbers, dataintegrity signature, and packet group signatures. Receive engine Wire-speed packet filtering, capturing, real-time latency and inter- arrival timefor each packet group, data integrity, and sequence checking User defined fieldfeatures Fixed, increment or decrement by user-defined step, value lists, range lists,cascade, random, and chained Filters 2x128-bit user-definable pattern and offset, frame length range, CRC error, dataintegrity error, sequence checking error (small, big, reverse) Data field per stream Fixed, increment (byte/word), decrement (byte/word), random, repeating, user-specified, CJPAT, CRPAT Error generation CRC (good/bad), oversize frame, parity error, R_RDY Latency measurements 20 ns resolution in packet timestamp Statistics Link State and speed (Tx) Bytes, Frames, (count and rate) (Rx) Bytes, Frames, (count and rate) (Rx) CRC errors, Oversize (2112), Undersize (24)(count and rate) Packet group Latency Data Integrity Capture Trigger/Filter (count and rate) User Defined Stats: 6 (count and rate) Protocol Server Tx/Rx (count and rate) Remote B-B Credit Value Remote B-B Credit Count R_RDY Tx/Rx (count and rate) Disparity errors (count and rate) Stats: Port CPU status Transmit Duration Operating temp. range 41°F to 95°F (5°C to 35°C), ambient air Application Support IxNetwork: FC-1/FC-2 wire-speed traffic generation and analysis, including FLOGI, NPIV, PLOGI, SCR, NS Registration, etc. Tcl/Perl API: Custom user script development for FC-1/FC-2 testing Note: 1XM12 High Performance chassis (941-0009) is required for 88 ports to be installed in a single chassis. A field replaceable power supply upgrade kit (943-0005) is available for the XM12 chassis (941-0002) to convert it to the high-performance version. Up to 11 8-port load modules are supported in an XM12 High Performance chassis, and up to 8 8-port load modules are supported in a standard XM12 chassis. The XM2 chassis (941-0003) supports up to sixteen ports. 288 ports per XM12 chassis with the 8-port load modules and 48 ports per XM12 chassis with the 4-port load modules 316 ports per XM2 chassis with the 8-port load modules and 8 ports per XM2 chassis with the 4-port load modules 4When a Fibre Channel load module is installed in an XM12 chassis, the maximum operating temperature of the chassis is 35°C (ambient air). Resources Data Sheet Fibre Channel Solution Brief Fibre Channel Load Module Fibre Channel Over Ethernet Brochure Ixia Solutions BrochureOverview of Ixia's verification and visibility solutions used to design, verify, and monitor a broad range of wired, Wi-Fi, and 3G/LTE equipment and networks. Ordering 950-0001 FCMGXM4S-01 FCMGXM4S-01, 4-Port Fibre Channel Load Module, with 2Gbps, 4Gbps and 8Gbps support, SFP+ interface; REQUIRES one or more SFP+ transceiver options. 950-0002 FCMGXM8S-01FCMGXM8S-01, 8-Port Fibre Channel Load Module, with 2Gbps, 4Gbps and 8Gbps support, SFP+ interface; REQUIRES one or more SFP+ transceiver options. FC Transceiver options: The fibre channel load modules have the following SFP+ transceiver options: 948-0020 Fibre Channel SFP+ Short Reach, pluggable, multimode, 850nm optical transceiver with duplex LC connector. Supports 2Gbps, 4Gbps and 8Gbps rates. For use with FCMGXM4S-01 (950-0001) 4-port and FCMGXM8S-01 (950-0002) 8-port load modules. 948-0021 Fibre Channel SFP+ Long Reach, pluggable, single mode, 1310nm optical transceiver with duplex LC connector. Supports 2Gbps, 4Gbps and 8Gbps rates. For use with FCMGXM4S-01 (950-0001) 4-port and FCMGXM8S-01 (950-0002) 8-port load modules.